AC Series · Compact Amplifiers
Real Power.
Real Numbers.
Nine amplifiers. Every channel independently tested at rated power — all simultaneously, under real-world operating conditions. No peak figures. No asterisks. Just the power on the box.
9 Models
4-CH · 5-CH · 6-CH · Mono
2000W
Max RMS Output
1Ω
Stable · Verified
4-Layer
SMD PCB Standard
All Channels Driven Simultaneously
4-Layer SMD PCB
No Peak Numbers. Ever.
Independent Channel Protection
1-Ohm Stable Mono Models
Free Shipping Over $99
30-Day Returns
Verified RMS · Printed on the Box
All Channels Driven Simultaneously
4-Layer SMD PCB
No Peak Numbers. Ever.
Independent Channel Protection
1-Ohm Stable Mono Models
Free Shipping Over $99
30-Day Returns
Verified RMS · Printed on the Box
Why AC Series
Built to a
Different Standard.
The AC Series was designed around one principle: every specification on the box is measured, not marketed. Four-channel models are tested with all four channels driven simultaneously. Mono models are tested at rated load. No asterisks. No fine print. Just the number we published.
Nine models cover every install — from a complete front and rear stage to a dedicated mono subwoofer channel pushing 2,000 watts. One series. One standard. No compromises.
01
All Channels Tested Simultaneously
Every AC Series amplifier is tested with all channels driven at rated power at the same time — not one channel while the rest idle.
02
4-Layer SMD PCB Standard
Dedicated internal power and ground planes. Faraday shielding against EMI and alternator whine. More copper mass. More thermal headroom.
03
Independent Channel Protection
Thermal shutdown, short circuit, over- and under-voltage protection on every channel. Self-recovering. Built in, not bolted on.
04
No Peak Numbers. Ever.
We don't publish peak figures. Every watt figure on every AC Series spec sheet is RMS, measured under real-world operating conditions.